PRODUCTS
XINLIDA WOOD

CONTACT US

5MM LVT Lock Series
5MM LVT Lock Series
5MM LVT Lock Series
5MM LVT Lock Series
5MM LVT Lock Series
5MM LVT Lock Series
5MM LVT Lock Series
5MM LVT Lock Series
5MM LVT Lock Series
5MM LVT Lock Series

5MM LVT Lock Series

Xinlida LVT snap-on flooring is primarily made from luxury vinyl resin, which is free of harmful substances such as formaldehyde, lead, and benzene. No adhesives are required during the production process, resulting in zero added formaldehyde. It is waterproof, moisture-proof, and mildew-resistant, becoming astringent when wet and non-slip. It is extremely wear-resistant and has a long service life. It is flame-retardant. It offers a comfortable and springy feel, reducing walking fatigue. It also provides excellent noise reduction. The snap-on installation is quick and easy, making it DIY-friendly. It is easy to care for, saving time and effort in daily maintenance. It comes in a variety of stylish patterns and can realistically mimic wood and stone grains. Its excellent thermal conductivity makes it suitable for underfloor heating.

Category:

5MM LVT LOCK SERIES

Inquiry
WhatsApp

Keywords:

5MM LVT LOCK SERIES

  • Details
  • Color Selection
  • Advantage
  • Parameter

  • Product

    LVT Flooring / Luxury Vinyl Plank/ Luxury Vinyl Flooring

    Thickness

    4.0mm,4.2mm,4.5mm,5.0mm,5.5mm

    Wear layer

    0.15mm, 0.2mm, 0.3mm, 0.5mm, 0.55mm,0.7mm

    Features

    Waterproof, Fireproof, Sound proof, Wear resistant

    Useage

    Bedroom, Kitchen, Landry, Hospital, Mall, School, etc

     

    Click lock lvt flooring size

    Inch

    mm

    6”36”

    152.4*914.4mm

    6”48”

    152.4*1219.2mm

    7”48”

    177.8*1219.2mm

    9”48”

    228.6*1219.2mm

    7”48”

    180*1220mm

    Herringbone size

    4.7”24

    120*610mm

    Locking system:

    Unilin,Valinge

    Surface texture

    Stone Grain Wood Grain

  • Test item(s)

    Test method(s)

    Test condition

    Requirement(s)(ASTM F1700-13a)

    Test result(s)

    Length

    ASTM F2055-10

    Specimen: 914mm×152mm, 5pcs Condition: 23±1 ℃ , 50±5%RH, 24h

    914.4mm±1.2mm

    Average:914mmDeviation from nominal size: -0.4mm

    Width

    152.4mm±0.2mm

    Average: 2.94mm Deviation from nominal size:-0.18mm~+0.04mm

    Squareness

    ≤ 0.25mm

    Deviation range:0.00mm~+0.10mm

    Thickness

    ASTM F386-11

    Specimen: 152mm×152mm, 5pcs Condition:23±1 ℃ , 50±5%RH, 24h

    3.0mm±0.13mm

    Average: 2.94mm Deviation from
    nominal size: -0.18mm~+0.04mm

    Thickness
    of wear
    layer

    ASTM F410-08(2013)

    Specimen: 13mm×50mm, 5pcs Condition: 23±2℃ , 50±5%RH,24h

    Commercial, Min 0.5mm

    Average: 0.315mm Maximum: 0.356mm
    Minimum: 0.286mm

    Residual
    indentation

    ASTM F1914-07(2011)

    Specimen: 51mm×51mm, 3pcs Diameter of indenter:4.521±0.0127mm Condition: 23±2℃ , 50±5%RH,24h → 140±1lb, 10min→Recovery time: 60min

    Average value:≤ 8% Maximum value:10%

    Average: 2.7% Maximum: 2.7% Minimum: 2.7%

    Flexibility

    ASTM F137-08(2013)

    Specimen: Length direction,250mm×50mm, 3pcs,
    Condition: 23±2℃ , 50±5%RH,24h The test piece is bent through 180º within 3s-5s around a mandrel under specified conditions.

    Test using a 25.4mm mandrel, no cracks or breaks

    When tested with a 25.4mm mandrel: Length direction, no cracks and breaks shown

    Dimensional
    stability
    (see note 2)

    ASTM F2199-09(2014)

    Specimen: 240mm×152mm, 3pcs
    Condition: 23±2℃ , 50±5%RH,
    24h →82±2℃ , 360min→23±2℃ , 50±5%RH, 24h

    ≤0.51mm/305mm (≤ 0.17%)

    Length Direction:-0.10%
    Width Direction:-0.07%

    Resistance
    to
    chemicals

    ASTM F925-13

    Specimen: 914mm×152mm, 1pcs
    Condition:23±2℃ , 50±5%RH, 24h Drop Method, Cover, 60±1min

    No more than a slight change in surface dulling, surface attack or
    staining

    Rating 0:No change (See Table1) (see Note 3)

    Resistance
    to heat

    ASTM F1514-03(2013)

    Specimen: 51mm×51mm, 3pcs
    Condition: 23±1 ℃ , 50±5%RH,
    24h →70±1 ℃ , 7days→23±1 ℃ , 50±5%RH, 24h

    Average ΔE*ab ≤ 8.0

    Average ΔE*ab :0.09 (see Note 3)

    Light
    stability

    ASTM F1515-15 & ASTM D2244-16

    Exposure cycle:Irradiance: 0.30W/(m2•nm)@340nm ,Continuous light at (63±2) ℃ BPT,(50±10) %RH Filter: Window Exposure period: 300h

    Average ΔE*ab ≤ 8.0

    Average ΔE*ab :1.1 (see note 4)

    Appearance

    ASTM F1700-13a Clause 7

    Specimen: 914mm×152mm, 5pcs Condition:23±1 ℃ , 50±5%RH, 24h

    The product shall be free of defects which adversely affect performance or appearance.

    No visible defects

    Binder
    content

    ASTM F1700-13a  Clause 6.1

    The binder contant shall bedetermined by statement of formula

    See Annex A

    Client’s statement See Annex A

Product Inquiry

Please fill in your contact information and your needs, and we will arrange a professional to contact you!

Submit

FAQ

Any more questions please feel free to contact: Sherry 

Whatsapp/Wechat: 8617762080167

Q

Are you factory or Trading company?

A

We are factory since 2003.

Q

Where is your factory?

A

We are in Chiping County, Liaocheng City, Shandong provice. Warmly welcome to make a field inspection.

Q

Do you provide samples for free?

A

We can provide samples for free, but you need to pay for shipping.

Q

What is your terms of packing?

A

Generally,we pack our goods in bundles or wood pallet. We can also do package according to customer's request.

< 12 >